Sprinkler repair in Grand Blanc, MIFind the leak before the bill does.

On township water, every 748 gallons is another unit on the bill, and one broken head can waste that in a few weeks. Misty's Irrigation runs every zone, finds what is actually wrong and fixes it, in the city or the township.

Repair in Grand Blanc

What breaks here, and why.

Grand Blanc systems run from add-ons at 1960s houses to the original systems in 2000s subdivisions, on three different water sources, in soil that drains slowly. Each of those leaves its own kind of trouble, and knowing which one you have speeds up the fix.

  • The 748 gallon math

    The township bills water per 100 cubic feet, which is 748 gallons. A cracked head can pour five gallons a minute. On a 20 minute zone that runs three times a week, a full billing unit is gone in about two and a half weeks, all of it into one spot.

  • Wet spot, or just wet soil?

    Conover soils, common around Grand Blanc, can hold a perched water table 6 to 18 inches down in spring, the same depth as most sprinkler pipe. A soggy patch in April may simply be the ground. One that stays wet into a dry July, in a line, is usually a leak.

  • Twenty year old subdivisions

    The southern half of the township built more homes in the 2000s than in any other decade, so many systems there are around 20 years old. At that age we find heads sunk into the thatch, worn seals that weep, valve diaphragms gone stiff and wire splices corroding in the valve box.

  • Iron on well systems

    A U.S. Geological Survey study found Genesee County well water from the glacial deposits commonly carries objectionable iron, which turns to reddish sediment in air. On a well-fed system that sediment can plug nozzles and screens, so a weak head gets cleaned, not just turned up.

An open valve box in a lawn with three sprinkler valves, wire connectors and a gloved hand
Illustration

What you get

A repair visit, start to finish.

Every visit follows the same order, so nothing gets missed and you know what you are paying for before we start.

  • Every zone run

    Each zone run and watched, not just the one you called about.

  • Cause found

    Dry spots traced to heads, dead zones to valves or wires, wet spots to leaks.

  • Explained first

    What we found and what it takes, before any work starts.

  • Heads and leaks fixed

    Broken heads and risers replaced, leaks dug and repaired, heads aimed.

  • Valves and wiring

    Stuck valves cleaned or rebuilt, failed solenoids and cut wires replaced.

  • Put back

    The zone tested again, the turf replaced, and nothing left behind.

Try it

What a few bad heads do to a lawn.

Switch between before and after a tune-up. The brown patches, the soaked spot and the numbers all come from where the water lands.

Illustration. The numbers come from this drawing.
  • 0%of the lawn watered evenly
  • 0%too dry
  • 0%of the water on pavement
  1. Knocked sideways. Watering the driveway, not the lawn.
  2. Clogged nozzle. Falls short, so the middle goes brown.
  3. Sunk head. The turf grew over it and blocks the spray.
  4. Broken head. No spray, just a puddle and a water bill.

In Grand Blanc

A repair visit in Grand Blanc.

Call or text (810) 423-9513 with the symptom: a geyser by the walk, a zone that will not shut off, a brown patch that keeps growing. A photo or a short video of the zone running helps us bring the right parts. We come over from Fenton, about 20 minutes away.

We start at the controller and run every zone, not only the one you called about, because the quiet problems cost water too. You hear what we found and what it takes before any work starts. Then it gets fixed, the zone runs again to prove it, and the turf goes back.

If a zone is running and will not stop before we get there, switch it off at the controller first. If water keeps flowing, close the valve that feeds the sprinklers, most often found in the basement where the irrigation line leaves the house.

Township billing unit
100 cubic feet, or 748 gallons
Common soil
Conover loam over dense glacial till
Drive from Fenton
About 20 minutes
Season
Spring through fall

5.0

From 40 reviews on Google.

What people mention most

  • Promptness6
  • Reasonable pricing5
  • Sprinkler repair3
  • Winterization3
  • Leak repair2
  • Hardworking staff2
Read them on Google

Quick to respond to phone message. Scheduled service call and took great care of my sprinkler system, replacing 2 sprinkler heads and checked all of the others. I highly recommended this company for their services

Susan R.Service call, two heads replaced, Google review

Misty’s did some repair work at a fair price. Staff was very pleasant, on time and cleaned up well in addition to excellent communication. Will use them in the future for any sprinkler system needs without it a doubt!

Joe S.Repair work, Google review

Misty’s Irrigation came out to repair and inspect our lawn irrigation system and did a great job. Very knowledgeable, professional, and just great people to work with. It’s always nice being able to support a local Fenton business, especially when they provide this kind of service. Highly recommend!

Zachary B.Repair and inspection, Google review

Questions

What people ask about sprinkler repair in Grand Blanc.

If yours is not here, call or text (810) 423-9513.

Does Misty's repair sprinkler systems in Grand Blanc Township as well as the city?

Yes. Misty's Irrigation repairs systems all over the City of Grand Blanc and the township, whoever installed them: broken heads, leaks, stuck valves, cut wires and controllers that skip zones. Call or text (810) 423-9513 and tell us what the system is doing.

My water bill jumped in midsummer. Could it be the sprinklers?

It often is. A broken head, a cracked fitting under the turf or a valve that never fully closes can waste hundreds of gallons a week, and nobody sees it because most systems water before dawn. Look for a soggy stripe, a sunken spot or water standing in the valve box. Then have every zone run and watched.

What should I do before the repair visit?

Note which zones misbehave and what they do. Push a stick or a flag into any soggy or sunken spots so they are easy to find in daylight. Make sure we can reach the controller and the shutoff. That is all we need to get started.

Why do my sprinkler heads keep sinking into the lawn?

Turf and thatch build up around them year after year, and heads settle in soft ground. A sunken head throws into the grass blades instead of over them, which leaves a dry ring around it. We raise it to grade, level it and aim it. More on heads and nozzles.

Our system runs off a well and the heads sputter. What causes that?

Usually a zone asking for more water than the well can deliver, so pressure drops and heads sputter or barely pop up. On iron-heavy well water, sediment plugging the nozzles is the other usual suspect. We check pressure at the heads, clean what is plugged, and if a zone is simply too big for the well, we can split it in two.

Book service

Book sprinkler repair in Grand Blanc.

Send it here or call. We will call back, ask a couple of questions so the right parts are on the truck, and give you a time.

  • A real person calls you back. Promptness is what reviewers mention most.
  • Fair, clear pricing. That is the second thing they mention.
  • Licensed and insured, family run out of Fenton.
Step 1 of 2 What do you need?
Where does the water come from?
Step 2 of 2 How do we reach you?

We use this to answer you and nothing else. Prefer to talk? Call or text (810) 423-9513.

CallTextBook service